The resin grinding wheel is the "noble minister" in the abrasives kingdom, which is very important. Any of its own nature is particularly important. The hardness of the resin wheel is closely related to its application range. Let's look at the effect of hardness on the application.

The hardness of the grinding wheel refers to the difficulty of the abrasive grains on the surface of the grinding wheel falling off under the action of grinding force. The hardness of the grinding wheel is soft, which means that the abrasive grains of the grinding wheel are easy to fall off, and the hardness of the grinding wheel is hard, indicating that the abrasive grains are difficult to fall off. The hardness of the grinding wheel and the hardness of the abrasive are two different concepts. The same kind of abrasive can be made into grinding wheels of different hardness, which is mainly determined by the performance and quantity of the bonding agent and the manufacturing process of the grinding wheel. The significant difference between grinding and cutting is that the grinding wheel has “self-sharpness”. Choosing the hardness of the grinding wheel is actually choosing the self-sharpness of the grinding wheel. I hope that the sharp grinding particles should not fall off too early, and should not be blunt or fall off. .

As can be seen from the above summary, we should pay attention to the corresponding problems when using, especially the hardness will directly affect its application range, so we must pay attention to the content of these hairs in production, so that we can It will be smoother in later use and will be used in a wider range.